The Ultimate Brisket Burnt Ends (2024)

Beef Brisket Burnt Ends are one of the ultimate treats in BBQ and a true reward for your hours of hard work in low and slow cooking. Burnt Ends, often referred to as “meat candy”, have a soft texture and a sweet and tangy sauce finish. This burnt ends recipe is for cooking a whole packer brisket and then portioning the brisket point into burnt ends.

Understanding a Packer Brisket

There are two muscles on a full packer brisket called the point (deckle) and the flat. The point and flat are connected by a layer of fat. That fat line will be thick.The point is well marbled and the best cut for burnt ends.

Thebrisket flatis leaner and best for slices. You can smoke the entire brisket into an amazing meal, but for burnt ends you have to take a few additional (and well worth it) steps.

You can call your butcher in advance to see if they will sell just the point. If that is the case, follow this recipe by smoking the seasoned point, cutting into cubes, saucing, and finishing in the smoker.

For more tips you can also check out our article on the top tips for perfect smoked brisket.

What Are Burnt Ends?

Traditional Burnt Endsare cubed up pieces of smoked meat from the point of the brisket. They are cubed, then sauced, and added back into the smoker to caramelize, rendering a juicy and tender beef bite.

They are said to have originated in Kansas City by a few early BBQ pioneers. Today you can swing by Jack Stack or Joe’s Kansas City (formerly Oklahoma Joe’s) and taste their version of the KC origin story.

We are using the entire packer brisket, smoking it, and then separating the point from the flat to make burnt ends. Serve the brisket flat along side of the burnt ends or as the main dish with the burnt ends as the appetizer.

Don’t let the name fool you.Burnt ends are not, in fact, burnt.They are cubed up and have a darker color from the smoke creating bark, and then continue to form more color as they cook in the sauce.

The sugar in the sauce caramelizes helped by adding honey, butter, agave nectar, or any other similar ingredient. There are even variations of burnt ends from other meats, like our popularPork Belly Burnt Ends.

Ingredients

• Whole Packer Brisket – Trimmed. If you are wondering what “quality” to buy, like a prime grade versus choice or even Wagyu, this will come down to what you can afford. We recommend at least a choice quality in order to get the right amount of marbling.
• Binder – We use olive oil to help the seasoning adhere to the brisket. Alternatively you can use beef broth or even a thin layer of mustard.
• Seasoning Rub – We like a simple SPG rub (kosher salt, coarse black pepper, and granulated garlic). Note: if you use garlic powder use half the portion. We also have a savory brisket rub which has paprika, cayenne pepper, and onion powder for a little more richness.
• Barbecue Sauce – We opt for our Kansas City BBQ sauce or our Red Wine BBQ Sauce.
• Honey and Butter – The honey adds a sweet flavor to balance the BBQ sauce and butter adds richness and thickens up the glaze. Some people add brown sugar, but we find it is too sweet.

Portions are in the recipe card. For more brisket seasoning and sauce inspirations check out our category of BBQ sauces and seasonings.

How to Make Burnt Ends

There are different ways to make them, but this is the most authentic cooking process.

1. Smoke the Brisket. Some may separate the point and just smoke that, which is fine, but we just cook them together all at once.
2. Separate the Point and Flat. After the brisket reaches 165 degrees Fahrenheit use a long slicer knife along the fat pocket that is between the point and flat and separate the two muscles.
3. Cube the Point. Cut up the point into 1 to 1 1/2 inch cubes and add to a tray, then add sauce and honey and toss together. Then place, uncovered, back into the smoker for a few more hours.
4. Remove from Smoker. We typically probe the burnt ends with an instant read thermometer, like the Thermoworks Thermapen, for texture and the general temperature of the burnt ends is 200 – 210 degrees F. They should probe like butter.

If you are cooking with American Wagyu plan less time when smoking. Read our full article on cooking with American Wagyu.

Preparation

Before getting started you want to trim the full brisket. You will want a large cutting board or sheet tray to do this. To prevent either from slipping around place a towel under it.

To see this in action, view our full length video on prepping a full packer brisket.

1. Place brisket fat cap side down on the cutting board. Remove the silver skin from the flat side with a sharp knife.
2. Remove excess fat off the sides.
3. Flip the brisket fat side up. Slowly remove layers of the fat cap so that about 1/4 inch of fat is left on top of the point and the flat. The fat cap on top of the point is going to be thick so expect to remove a far amount of fat.

We typically remove a total of 3 pounds for a 12 – 13 pound brisket.

Smoke the Whole Brisket

Start by cooking the brisket packer as you would normally would, like in our smoked brisket recipe. Ideal cooking temperature is low, 250 degrees Fahrenheit. We use fruit woods readily available in the Pacific Northwest.

Typically this process runs up to five or six hours until an internal temperature of 165 degrees, measured by a leave in blue tooth thermometer, like the Thermoworks Smoke unit.

Separate The Point From the Flat

At the time you would normally wrap your whole brisket (when internal temp reaches 165 degrees F), that is when we separate the flat from the point. Trim off some of the fat layer between the point and the flat, and then cut up the point into 1 ½-inch cubes.

Cook the point cubes and flat separately. The point cubes go into a pan with BBQ sauce, butter, dry rub, and honey, and the flat is then wrapped and then placed back onto the smoker to continue cooking.

You can also separate the point before you cook, but for our preferred method wecook the whole brisket and then separate the point from the flat when we wrap.

Flavor and Sauce The Burnt Ends

When placing the burnt ends into the pan, dust with more rub, then add sauce. It’s important to have enough BBQ sauce for the size of the pan you are using. Typically we start with one cup of sauce and add more as needed to make sure the burnt ends are all evenly covered, otherwise the burnt ends will continue to cook unevenly and you’ll have some chewy bites alongside some perfect morsels.

For more flavor add a touch of butter and honey. This adds another punch of flavor and the sugar in the honey help caramelize making great burnt ends bbq.

Cook for two more hours, uncovered. This allows the fat to render out of the burnt ends, and the sauce will reduce while cooking. After two hours, when the sauce has reduced a bit, cover the pan with foil and return to smoker.

Continue cooking, covered, and check the temperature of the burnt ends 60 minutes later, and pull when the internal temperature of the burnt ends are 200 degrees, or until the meat thermometer inserts like into room temperature butter. This process will take up to 2 additional hours after they are covered in foil. The key is temperature not time. When you get the temperature reading and feeling you like, pull the ends and serve when they slightly cool.

We recommend the Thermoworks Thermapen One when checking the temperature.

The Brisket Flat

Don’t forget about the flat! Continue to smoke like you would a normal brisket. Wrap the flat in butcher paper (or aluminum foil), until the temperature of the flat starts reaching 190 degrees. This can take a few more hours. The flat is done when the temperature probe inserts into the flat like room temperature butter.

Remove wrapped, and place into a small cooler (with no ice) to let rest for an hour. Remove, slice, and serve for the main dish.

Wine Pairing For Brisket and Burnt Ends BBQ

You may be surprised to know our favorite go to for this recipe is rosé wine. This is because of the smoky beefy flavor, and sauce, a nice dry rosé complements the flavor of the brisket. Buy a bold Washington State rosé, which tends to be made from merlot, or bigger red blends. Or go with a nice dry sparkling wine.

Other Brisket Inspired Recipes

Have leftover brisket or looking for brisket recipe inspirations? Here is a list of our favorites. For more details you can check out our article on leftover brisket ideas. And check out our guide on the best brisket tools to have for the best outcomes.

• Brisket Grilled Cheese Sandwich – Tender brisket topped with melted cheese and a golden brown crust. The ultimate sandwich.
• Brisket Chili – This award winning chili is one of the most popular chili recipes on the web. Rich flavor with incredibly tender brisket pieces.
• Brisket Nachos – This is a one pot dish that will make a crowd sing.

Side Ideas for Burnt Ends

• No Mayo Coleslaw – This recipe is rich and offsetting that with a bright and light coleslaw is perfect.
• Skillet Cornbread – Grilled cornbread with honey flavors and baking spices.
• BBQ Beans – Slowly smoked baked beans with bacon.

Frequently Asked Questions

This post was originally published in April 2019, and updated in Oct 2024 with updated details and recipe steps. The recipe remains the same.

About Vindulge

Mary (a certified sommelier and recipe developer) and Sean (backyard pitmaster) are co-authors of the critically acclaimed cookbook, Fire + Wine, and have been creating content for the IACP nominated website Vindulge since 2009. They live in Oregon on a farm just outside Portland.

Now on 2nd edition

Fire + Wine Cookbook

“This book is a one-stop guide for anyone truly interested in elevating their BBQ experience into a culinary work of art.”
5 out of 5 Stars
San Francisco Book Review

Order Now

Tried this recipe? Give us a star rating and we would love to see! Mention@vindulgeor use the hashtag#vindulge on all the social media handles. And consider subscribing to our newsletter where we drop all our favorite ideas and inspirations every week.